• Two year parts warranty.
• Deep-formed chair tank
• Double skin
• Independent wash/rinse arms in stainless steel
• Double tank filter with debris collection system + pump filter
• Self cleaning vertical pump
• Standard rinse pump
• Electronic.
• Four washing cycles
• Energy saving
• Thermostop to grant the rinse temperature according to the HACCP norm
• Multichromatic START key
• TR: STEAM CONDENSER AND HEAT RECOVERY SYSTEM ENERGY SAVING CARE FOR ENVIRONMENT AND YOUR HEALTH
With the KROMO warewashing models KP202/302/402 ETR Plus up to 50 % of energy costs can be saved! The TR system is an heat exchanger: the moist warm water vapour is drawn direct-ly out of the machine when the door is closed and used for pre-heating the cold water supply up to around 50°C. As a result the energy required to reach the final rinse temperature (approx. 85°C) is dramatically reduced. Depending on the model you save between 35kWh (KP202/KP302) and 55kWh (KP402) that means saving between 2.146 (KP202/KP302) and 3.373 (KP402) each year. TR technology improves the room s air quality and climate as well. The heat exchanger reduces the exhaust air temperature by more than an half. The absolute humidity amounts now to only approx. 20% of the values without exhaust air heat recovery. This permanently improves the operators comfort.
based on 21 cent/kWh8 h/day365 days/year
• PLUS SYSTEM
Rinsing system with steady temperature and constant water pressure. KROMO developed an innovative rinsing system with steady temperature and constant water pressure regardless of external conditions. In the PLUS system the water is drawn from the booster with a pressure increase pump insuring correct pressure at the rinse jets and machine operation regardless of mains water pressure and temperature.In this way you have a granted proper rinse even with low mains pressure.The rinse water temperature remains exact (85°C) and constant during the rinse cycle as the booster re-fill occurs only once the rinse cycle is done preventing the mix between intake water and heated water in the boiler. Additionally the Break Tank system eliminates mains water back-flow this water being non-drinkable due to rinse-aid detergents and washing residuals. The PLUS SYSTEM is an AA maximum effectiveness classified system according to Standard No EN1717 To prevent pollution of the drinking water supply by mains water back-flow .
• Deep-formed chair tank
• Double skin
• Independent wash/rinse arms in stainless steel
• Double tank filter with debris collection system + pump filter
• Self cleaning vertical pump
• Standard rinse pump
• Electronic.
• Four washing cycles
• Energy saving
• Thermostop to grant the rinse temperature according to the HACCP norm
• Multichromatic START key
• TR: STEAM CONDENSER AND HEAT RECOVERY SYSTEM ENERGY SAVING CARE FOR ENVIRONMENT AND YOUR HEALTH
With the KROMO warewashing models KP202/302/402 ETR Plus up to 50 % of energy costs can be saved! The TR system is an heat exchanger: the moist warm water vapour is drawn direct-ly out of the machine when the door is closed and used for pre-heating the cold water supply up to around 50°C. As a result the energy required to reach the final rinse temperature (approx. 85°C) is dramatically reduced. Depending on the model you save between 35kWh (KP202/KP302) and 55kWh (KP402) that means saving between 2.146 (KP202/KP302) and 3.373 (KP402) each year. TR technology improves the room s air quality and climate as well. The heat exchanger reduces the exhaust air temperature by more than an half. The absolute humidity amounts now to only approx. 20% of the values without exhaust air heat recovery. This permanently improves the operators comfort.
based on 21 cent/kWh8 h/day365 days/year
• PLUS SYSTEM
Rinsing system with steady temperature and constant water pressure. KROMO developed an innovative rinsing system with steady temperature and constant water pressure regardless of external conditions. In the PLUS system the water is drawn from the booster with a pressure increase pump insuring correct pressure at the rinse jets and machine operation regardless of mains water pressure and temperature.In this way you have a granted proper rinse even with low mains pressure.The rinse water temperature remains exact (85°C) and constant during the rinse cycle as the booster re-fill occurs only once the rinse cycle is done preventing the mix between intake water and heated water in the boiler. Additionally the Break Tank system eliminates mains water back-flow this water being non-drinkable due to rinse-aid detergents and washing residuals. The PLUS SYSTEM is an AA maximum effectiveness classified system according to Standard No EN1717 To prevent pollution of the drinking water supply by mains water back-flow .
Please note:
- Price excludes shipping. Contact us for shipping prices to your country.
- Standard voltage. Please enquire for your destination point requirements.