Description
Animo M-LINE thermos flask machine – MT200 – fixed water connection
Coffee maker for use with 2.1 and 2.2 liter pump thermos. Incl. plastic drip tray for thermos flask. Excl. pump thermos.
- Connection value 1N ~ 220-240V / 2100W / 50-60Hz.
- Hourly capacity 144 cups (18 liters)
- Dimensions B = 205, D = 380, H = 585
- Colour black
Fully equipped
- fixed water connection 3/4 “
- brewing time; approx. 7 minutes per pump thermos
- capacity; 18 liters of coffee per hour
- suitable for pump thermos 2.1 / 2.2 liters
- Candle detection starts and stops the brewing process
- leak stop
- coffee-ready audio signal
- descaling indication
- continuous brew and pre-wet brew setting
- touch keys
- dry-boil protection that can be reset from the outside
- 220-240 V / 3200 W
Specially for pump thermos
With the MT200 coffeemaker you can make fresh filter coffee, simply and quickly, directly in a pump thermos.
The brewing time is approximately 7 minutes for 1 full jug (approx. 2.2 liters). Dispensing coffee is very easy thanks to the pump thermos!
Optimal ease of use
You can easily connect the coffee maker to the water supply. The handy touch keys on the top give you optimum ease of use. You can set the coffee to be brewed per cup. As soon as the coffee is ready, the coffee maker gives an audible signal.
Unique candy detection
Thanks to the patented tooth detection you prevent the filter from overflowing if you remove the jug during the brewing process to pour a cup of coffee. The leakage stop closes the filter, this prevents dripping.
Easy to maintain
A descaling indication indicates when it is time to clean the machine. Cleaning is very easy.
Contemporary look
Coffee makers from the M-LINE have, partly due to the use of stainless steel in combination with plastic, a striking and contemporary look. In short, an asset to any location!
